How to get started with the MinnowBoard MAX
===========================================
1. Build
Apply the defconfig:
$ make minnowboard_max_defconfig
Add any additional packages required and build:
$ make
2. Write the SD card
The build process will create a SD card image in output/images.
Write the image to an mSD card, insert into the MinnowBoard MAX
and power the board on.
$ dd if=output/images/sdcard.img of=/dev/mmcblk0; sync
The system starts two consoles: one on the serial port
and one on HDMI.
3. Enjoy
Additional information about this board can be found at
http://www.minnowboard.org/.
luozhikun
2b47d28476